Morph lumber controversy

User avatar
BIueBerryMuffin
Basic Tree
Posts: 5
Joined: Sat Aug 16, 2014 12:29 am
Been thanked: 1 time

Re: Morph lumber controversy

Postby BIueBerryMuffin » Tue Aug 19, 2014 2:22 pm

TimmyTheTauren wrote:But two normal workers is 12 food while one champ is 30?


This is about Morphling not Panda. Silly timmy. :)


Burn wrote:"In seeds 2 normal workers gather 180 wood by the exact time 1 champ gather 170." Off by 10 wood? That isn't much.

Sample size isn't big enough, 180 and 170 is basically the same after accounting random error and lack of sample size.

Might as well call it even, even if we say that this is a fair test, if you multiply both by 100, that's 18k and 17k wood.

-Burn


Actually it would be multiplied by 25 since max food is 150. :)

Burn
Protector of Nature
Posts: 2588
Joined: Thu May 02, 2013 6:29 am
Location: Clan BTI @ East
Has thanked: 18 times
Been thanked: 54 times
Contact:

Re: Morph lumber controversy

Postby Burn » Tue Aug 19, 2014 3:06 pm

BIueBerryMuffin wrote:Actually it would be multiplied by 25 since max food is 150. :)
I was using x 100 for reference. Everyone knows the max. food limit, but good thing we have Capt. Obvious here. Silly Muffin.

-Burn

MatthewB
Basic Tree
Posts: 1
Joined: Thu Sep 04, 2014 6:08 am

Re: Morph lumber controversy

Postby MatthewB » Thu Sep 04, 2014 7:38 am

After playing morph a bit I think the lumber difference is the least important factor when choosing between regular or champion workers. Champions require less time and space to set up but feed a lot of experience. If you are playing against an average/bad titan or you're lumber basing in a spot that can't be nuked I think champions are better.

Stealer
Protector of Nature
Posts: 3160
Joined: Thu Sep 26, 2013 9:37 pm
Has thanked: 18 times
Been thanked: 47 times

Re: Morph lumber controversy

Postby Stealer » Sun May 01, 2016 4:05 pm

@beekauzh @sat

h00W - https://github.com/Novynn/IDX/blob/a02e ... /h00W.json
"value": "A0GA,A0G0,A0PA,Adtn"
h022 - https://github.com/Novynn/IDX/blob/a02e ... /h022.json
"value": "A00T,Adtn"

A0GA = magic resistance - https://github.com/Novynn/IDX/blob/a02e ... /A0GA.json
A0G0 = magic resistance - https://github.com/Novynn/IDX/blob/a02e ... /A0G0.json
A0PA = standard gathering (most workers have this) - https://github.com/Novynn/IDX/blob/a02e ... /A0PA.json
A00T = champion gathering - https://github.com/Novynn/IDX/blob/a02e ... /A00T.json

So I believe the important things to look at here are the "Har1" id which is lumber/swing and the "adur" id is the duration between swings.

Champions -
tier1 = 2 lumber / 2.4 seconds (x 25 workers = 20.83 lumber/second)
tier2 = 2 lumber / 2.2 seconds (x 25 workers = 22.72 lumber/second)
tier3 = 2 lumber / 1.9 seconds (x 25 workers = 26.32 lumber/second)
tier4 = 2 lumber / 1.8 seconds (x 25 workers = 27.78 lumber/second)

Worker -
tier1 = 1 lumber / 1.8 seconds (x 50 workers = 27.78 lumber/second)
tier2 = 1 lumber / 1.7 seconds (x 50 workers = 29.41 lumber/second)
tier3 = 1 lumber / 1.6 seconds (x 50 workers = 31.25 lumber/second)
tier4 = 1 lumber / 1.4 seconds (x 50 workers = 37.71 lumber/second)

builder - h021, lumber ability = A04I but has no adur
tier1 = 25 lumber / 1 second? (x 1 builder = 25 lumber / second)

moral of the story is, doesn't matter if you go champ or workers. If you lumber with your builder you'll be better off than the guy who did worker and didn't focus builder.


Return to “Builders”

Who is online

Users browsing this forum: No registered users and 3 guests